Get the Materials
In vehicle repair it is crucial to reproduce the same quality and visual appearance provided by the original OEM seams to avoid corrosion. With the below instruction you can recreate standard brush textures and standard seams.
Clean all contamination from the surfaces and pre-treat sealing area with TEROSON VR 20.
Remove bottom cover and open cartridge. Screw on nozzle tightly. Insert cartridge and adjust nozzle to working position. For spacing and in between sealing use TEROSON RB 81 (cartridge or profiled tape).
Application – Brush texture
You can either apply the adhesive directly with a special hard brush or you can finish an existing fresh applied bead with it.
Application – Standard bead
Produced by extruding sealant from a cartridge / foil pack through a nozzle. For the application of standard beads, there mainly exist two different nozzle types: The door edge nozzle and the standard nozzle. Use for basic sealing and gap-filling applications.
Application – Sealing Tape
Spray-on sealing tape (TEROSON RB II)
Plastic sealing tape (TEROSON RB II)
Plastic sealing tape, round profile (see picture) (TEROSON RB VII)